Equinox Myriad Plus Implants 2.0

By |Published On: 30 May 2022|1.4 min read|Views: 275|

PartMaker had a prosthodontist reach out recently with the hopes of customising an equinox myriad plus part as the client had encountered a patient with an unusually deep implant and the original myriad plus part was too short.

After careful consideration of the requirements, Dr. Hart and the team at PartMaker utilised specialist equipment at the PartMaker workshop to come up with a few prototypes of the revised implant, incorporating various changes to the original design.

The flange was initially elongated to accommodate the extra depth needed by the prosthodontist, but that introduced extra unwanted space around the implant location. A second prototype was developed where the chimney was lengthened instead of the head, and this resolved the issues and was deemed suitable by the prosthodontist. Additionally, a biaxial head was also implemented for the screw to allow angular access and provide added ease of use.

This is just one the many examples of the high-end custom work that is done in the PartMaker workshop. For more inquiries, feel free to contact us at admin@partmaker.com.au.

PartMaker is a manufacturing company that makes custom dental solutions such as custom screws, abutments, LOCATOR® compatible parts, and many more for different systems to service the specific needs of clients and customers. This experience with a wide range of custom products gives PartMaker an upper hand in developing innovative solutions to unique problems.  

Share This Story!

Back To Latest News

Shop Dental Equipment

Learn More About Us

Contact Partmaker